The Cross Industries 10/10 Cross Mag


If you shoot firearms of any sort you have likely heard of places with magazine capacity restrictions like California, New York, a couple of other states, and of course Canada. Sadly, we all know these restrictions do not stop criminals and only satiate the uninformed. I mean, murder is illegal and that has yet to stop them. Restricted capacity options in AR-15 magazines, for a long time, have been a pinned magazine or a stubby ten rounder. Magwedge out of Canada came out with a coupler for the 10 round magazines years ago but not much has come out to fix the magazine-capacity-challenged amongst us until Cross Industries, (also from Canada), came along with the 10/10 Cross Mag.

Cross Industries 10/10 Cross Mag
The Cross Industries 10/10 Cross Mag in forward/forward straight configuration sitting in the Maple Ridge Armory’s Renegade straight-pull bolt action rifle.

The 10/10 Cross Mag was certainly not something that was rushed to the market. Cross Industries first started showing off the magazine in 2017 but it was not until several years later that they finally released the magazine to a lot of fanfare.

Cross Industries mag
Short magazines work in some situations however they can be a real pain in your hindquarters when it comes to magazine pouches.

Now, you may be wondering why people were excited about ten-round magazines, but there is a very good reason for that. Have you ever stuck a stubby ten-round AR-15 magazine into a magazine pouch? It swallows it like Kobayashi at a hotdog eating contest. Then you’re stuck fisting a magazine pouch like you are trying to get the last Pringle from the can.

base plate removal of Cross Industries 10/10 Cross Mag
Removing the magazine base plate is as simple as pressing down on the central button and sliding it off. When you do this you can rotate the base pad in order to change the mounting configuration of the magazines.

Flip it.

Now, just coupling two magazines together isn’t the craziest feat of all time. I mean, I have been doing it for ages with a bit of gun tape, but that eventually starts to break down and gets slightly slimy. However, the 10/10 Cross Mag is a polymer magazine that flips the script (or the magazine), in a bit of a different way than others have. The innovative magazine base allows the magazines to be separated into two stubby ten-round magazines. That isn’t all though, it also allows the magazines to be coupled into four separate configurations like this picture on Breach Bang Clear demonstrates. You get two versions of the curved magazine: one with the rounds of both magazines facing forward and one with the magazines facing front and aft.

Cross Industries 10/10 Cross mag demo
Depending on how you want to reload the bottom magazine into the rifle the 10/10 Cross Mag allows for your rounds to face in different directions to help facilitate this. This is best used with an upside-down grip on the magazine so that when it is released from the magazine well you can cartwheel it 180 degrees forward.

This same thing can be said for the straight magazine configuration giving you both magazines facing forward and one with each facing opposite different directions. To couple or uncouple the magazines you give the magazine a solid twist and it pops apart. If you want to get all four variations of the magazine coupled together you will need to pop the base plate off of one of the magazines and turn it around.

10/10 Cross mag, forward/forward configuration
When the magazine is set up so both magazines are facing forward you can grasp the magazine normally and do a 180 degree flip sideways towards your strong side.

How well does it work?

Enough about the magazine and how it looks, let’s move on to how it functions because who cares if it looks good? The Cross Industries 10/10 Cross Mag has been used in our Remington 7615. However, most of the rounds have been fired through our Maple Ridge Armory Renegade. Through my two ten-round magazines they have collectively fired around 800 rounds so far without a hitch. I will mention, however, that the cartridge overall length that these magazines support is a tad shorter than say a Magpul PMAG or a standard Aluminum AR-15 magazine. For instance, my 77gr HPBT Nosler loads gently skim the front inside of the magazine which could potentially cause feeding issues. I have yet to encounter this, however. If you reload on the longer end of rounds you may notice this issue.

Cross Industries 10/10 Cross mag next to PMAG and standard aluminum AR15 magazine
You can see that the left-hand magazine being the 10/10 Cross Mag has a bit less available length for the bullet however it does work with SAAMI spec bullets just fine.

The 10/10 Cross Mag is a very competent magazine for the states and countries that like to punish law-abiding gun owners with silly magazine capacity restrictions. We have seen time and time again that needless prohibitions and laws have ended up with the market creating innovative solutions to combat the shortcomings of the uninformed. They apparently even have magazines coming out for the AR-10 style of rifles and ones for 7.62x39mm AR-15’s which I am really excited about. For the price of around $40USD, you get two ten-round magazines with the appropriate base pads to couple them together. 



Source link

Author: Joey Webster

Leave a Reply

Your email address will not be published. Required fields are marked *